Dos and Don’ts for Lifting Sling Safety

Step one to lifting sling safety is selecting the best sling material. But the biggest impact on safety and performance comes down to how you use—or abuse—your sling. Here are a couple of dos and don’ts to keep in mind when using your lifting sling.

All slings are rated for his or her most load capacity. OSHA and the American Society of Mechanical Engineers (ASME) require that slings be tagged with the rated capacity of the sling under different configurations. The lifting capacity is set in part by the fabric the sling is made of and the diameter of the sling, and in part by the way it is hooked up to the load. In particular, the angle at which the sling is used will significantly impact its general lifting capacity. Maximum lifting capacity is greatest when the sling angle is ninety°. The sharper the angle of the sling to the load, the more lifting capacity is reduced. A sling calculator can assist you identify the appropriate sling length and lifting capacity in your load and hitch style.

DO Use Proper Protection for Slings

Loads with sharp edges and corners can lower or abrade slings, particularly slings made of artificial materials. On the identical time, slings can cause damage to loads which are simply scratched or crushed. Sling protectors—which may consist of sleeves, pads or shields—are used to protect both the sling and the load. Using appropriate protective products will increase sling longevity and stop damage to the load.

DO Inspect Slings Incessantly

Slings should be visually inspected before and after each use to make sure that they have not been damaged. OSHA requires periodic formal inspections for all slings, which should be carried out yearly for slings under regular service and more ceaselessly for slings utilized in more rugged conditions. Lift-All offers proof-testing of slings bought via Pantero and may provide required inspection documentation for OSHA.

DON’T Use a Sling That is Damaged

Cuts, abrasions and fatigue damage significantly reduce the load capacity of the sling and improve the possibilities that a sling will fail during the lift. Slings that show signs of wear or damage have to be taken out of circulation immediately. One exception is the colored roundsling, which has a protective tubular jacket over the load-bearing core. Minor damage to the jacket will not impact the load capacity of the sling; so long as the core fibers are intact, the sling can continue to be used.

DON’T Use Slings in the Fallacious Surroundings

Temperature, chemical exposure and other environmental factors will all impact sling performance and longevity. Make sure the sling materials that you select is appropriate for the atmosphere in which it will be used. Synthetic supplies shouldn’t be used in high-temperature environments (more than 195°F). If you’re working with acids, alkalines, natural solvents, bleaches or oils, check the producer’s specifications to ensure that the sling material is suitable with these exposures. Moisture and sun exposure matter, too; synthetic materials are vulnerable to degradation with prolonged UV publicity, while wire rope and chain slings might corrode in damp conditions.

DON’T Abuse Your Sling

Sling failure typically results from misuse or abuse, resembling dragging the sling on the ground, tying knots in the sling, using slings at an extreme angle, failing to protect slings from sharp edges, or permitting sling legs to become kinked. Chemical publicity can also damage slings. Take proper care of your sling, so it can take care of you!